Showing 20 articles starting at article 181

< Previous 20 articles        Next 20 articles >

Categories: Chemistry: Thermodynamics, Engineering: Nanotechnology

Return to the site home page

     (via sciencedaily.com)     Original source 

Beautiful white wall paint does not stay beautiful and white forever. Often, various substances from the air accumulate on its surface. This can be a desired effect because it makes the air cleaner for a while -- but over time, the color changes and needs to be renewed. Now, special titanium oxide nanoparticles have been developed that can be added to ordinary, commercially available wall paint to establish self-cleaning power: The nanoparticles are photocatalytically active, they can use sunlight not only to bind substances from the air, but also to decompose them afterwards.

     (via sciencedaily.com)     Original source 

Scientists made a single-molecule transistor using quantum interference to control electron flow. This new design offers high on/off ratio and stability, potentially leading to smaller, faster, and more energy-efficient devices. Quantum interference also improves the transistor's sensitivity to voltage changes, further boosting its efficiency.

     (via sciencedaily.com)     Original source 

A research team has developed a technique that enables the nanoscale observation of heat propagation paths and behavior within material specimens. This was achieved using a scanning transmission electron microscope (STEM) capable of emitting a pulsed electron beam and a nanosized thermocouple -- a high-precision temperature measurement device.

     (via sciencedaily.com)     Original source 

If it walks like a particle, and talks like a particle... it may still not be a particle. A topological soliton is a special type of wave or dislocation which behaves like a particle: it can move around but cannot spread out and disappear like you would expect from, say, a ripple on the surface of a pond. Researchers now demonstrate the atypical behavior of topological solitons in a robotic metamaterial, something which in the future may be used to control how robots move, sense their surroundings and communicate.

     (via sciencedaily.com)     Original source 

Scientists unveil next-generation research trends in metaphotonics platforms with AI.

     (via sciencedaily.com)     Original source 

Though vapes have been heralded as a 'safer' way to consume either nicotine or cannabis, they present their own suite of risks that are being revealed through increasing regulation. Now, scientists have discovered that nano-sized toxic metal particles can be present in cannabis vaping liquids even before any heating occurs, and the effect is worse in illicit products.

     (via sciencedaily.com)     Original source 

Water pollution from dyes used in textile, food, cosmetic and other manufacturing is a major ecological concern with industry and scientists seeking biocompatible and more sustainable alternatives to protect the environment. A new study has discovered a novel way to degrade and potentially remove toxic organic chemicals including azo dyes from wastewater, using a chemical photocatalysis process powered by ultraviolet light.

     (via sciencedaily.com)     Original source 

Imaging being able to wear clothes that charge your gadgets just by wearing them. New research has brought us a step closer to achieving this reality.

     (via sciencedaily.com)     Original source 

In a step toward nanofluidic-based neuromorphic -- or brain-inspired -- computing, engineers have succeeded in executing a logic operation by connecting two chips that use ions, rather than electrons, to process data.

     (via sciencedaily.com)     Original source 

Leafhoppers, a common backyard insect, secrete and coat themselves in tiny mysterious particles that could provide both the inspiration and the instructions for next-generation technology, according to a new study. In a first, the team precisely replicated the complex geometry of these particles, called brochosomes, and elucidated a better understanding of how they absorb both visible and ultraviolet light.

     (via sciencedaily.com)     Original source 

New research shows that the next generation of lithium-sulphur (Li||S) batteries may be capable of being charged in less than five minutes, instead of several hours as is currently the case.

     (via sciencedaily.com)     Original source 

Anyone who wants to produce medication, plastics or fertilizer using conventional methods needs heat for chemical reactions -- but not so with photochemistry, where light provides the energy. The process to achieve the desired product also often takes fewer intermediate steps. Researchers are now going one step further and are demonstrating how the energy efficiency of photochemical reactions can be increased tenfold. More sustainable and cost-effective applications are now tantalizingly close.

     (via sciencedaily.com)     Original source 

Engineers propose a new quantitative framework to account for and predict the impact of temperature on the curing speed of platinum-catalyzed silicone elastomers. The findings could maximize throughput and minimize waste in the manufacturing of components for soft robotics and wearables.

     (via sciencedaily.com)     Original source 

Researchers have created a DNA origami platform called DoriVac, whose core component is a self-assembling square block-shaped nanostructure. DoriVac vaccines enabled tumor-bearing mice to better control the growth of tumors and to survive significantly longer than control mice.

     (via sciencedaily.com)     Original source 

Scientists have unveiled a groundbreaking technique for mass-producing polymer solid electrolytes, crucial components in batteries.

     (via sciencedaily.com)     Original source 

Mechanical engineers have devised a diagnostic platform that uses sound waves to spin an individual drop of water up to 6000 revolutions per minute. These speeds separate tiny biological particles within samples placed in a very light disc sitting on top of the spinning drop. The technique could allow new point-of-care applications ranging from precision bioassays to cancer diagnosis. The technique requires less time and sample volume while inflicting less damage to delicate exosomes.

     (via sciencedaily.com)     Original source 

A new process for microscale 3D printing creates particles of nearly any shape for applications in medicine, manufacturing, research and more -- at the pace of up to 1 million particles a day.

     (via sciencedaily.com)     Original source 

Global GDP loss from climate change will increase exponentially the warmer the planet gets when its cascading impact on global supply chains is factored in, finds a new study.

     (via sciencedaily.com)     Original source 

Ammonia is an important molecule with many applications. The end product of the famed Haber-Bosch process, it is commonly synthesized to capture nitrogen for fertilizers, and is used for refrigeration, in cleaning products, and in the production of pharmaceuticals. Recently, this modest molecule has also attracted interest as a potential resource for addressing one of today's most pressing challenges -- the need for reliable and abundant renewable fuels.

     (via sciencedaily.com)     Original source 

By wrapping a carbon nanotube with a ribbon-like polymer, researchers were able to create nanotubes that conduct electricity when struck with low-energy light that our eyes cannot see. In the future, the approach could make it possible to optimize semiconductors for applications ranging from night vision to new forms of computing.